Pass 70-342 Exam By Training Lead2pass New Microsoft 70-342 VCE And PDF Dumps (51-60)

With the complete collection of Questions and Answers, Lead2pass has assembled to take you through your 70-342 Exam preparation. Each Q & A set will test your existing knowledge of 70-342 fundamentals, and offer you the latest training products that guarantee you passing 70-342 eaxm easily.

QUESTION 51
Drag and Drop Question
You have an Exchange Server 2013 database availability group (DAG). Each member of the DAG has two network interfaces named Network1 and Network2. Network1 is used for client connections. Network2 is

used for database replication.
Network2 fails.
You discover that replication traffic is sent over Network1.
You need to ensure that all of the database replication traffic is sent over Network2.
The solution must minimize database replication downtime.
Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

image_thumb1_thumb

Answer:

image_thumb2_thumb

QUESTION 52
You have an Exchange Server 2013 organization that contains two servers.
The servers are configured as shown in the following table.

image_thumb3_thumb

EX1 and EX2 are members of a database availability group (DAG) named DAG1.
You have a database named DB1 that replicates to EX1 and EX2. EX1 fails.
You discover that DB1 does not mount on EX2.
You view the status of the mailbox databases as shown in the following table.

image_thumb4_thumb

You need to ensure that the database attempts to mount on EX2 if EX1 fails.
What should you change?

A.    The AutoDatabaseMountDial setting to Lossless
B.    The AutoDatabaseMountDial setting to BestAvailabilty
C.    The activation preference of DB1\EX2
D.    The activation preference of DB1\EX1

Answer: B

QUESTION 53
Your company has a data center in New York and a data center in Miami.
The company has an Exchange Server 2013 organization that contains a database availability group (DAG).
The DAG contains servers in both data centers.
The company plans to deploy Outlook Anywhere to all users.
You configure the following:
– All of the Exchange Server 2013 virtual directories in the New York data center use a host name of mail.contoso.com.
– All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of miami.mail.contoso.com.
– In each data center, a certificate from an enterprise certification authority (CA) is configured to contain the following:
– A certificate principal name of mail.contoso.com
– Subject alternate names of mail.contoso.com and miami.mail.contoso.com

You need to recommend which task must be performed to meet the following requirements:
– Users always must attempt to connect first to a server in the data center where their mailbox is located.
– Users must be able to access their mailbox if a single data center fails.

What should you recommend?

A.    Change the external host name of the Miami data center to mail.contoso.com.
B.    Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers.
C.    Run the Set-OutlookProvider cmdlet.
D.    Run the Add-AvailabilityAddressSpace cmdlet.

Answer: B

QUESTION 54
Your company has offices in Tokyo, Bangkok, and Shanghai.
All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the offices connect to each other by using a WAN link.
The network contains 10 servers that have Exchange Server 2010 installed.
The servers are configured as shown in the following table.

image_thumb5_thumb

You plan to deploy 10 servers that will have Exchange Server 2013 installed.
The servers will be configured as shown in the following table.

image_thumb6_thumb

Each site has an IP-PBX that provides telephony services for the mailboxes in that site by using unsecured SIP over TCP 5070. The IP-PBX uses the same port to connect to multiple SIP peers.
You need to recommend which tasks must be performed to ensure that the Unified Messaging (UM) features are available to the mailboxes if a single server fails.
Which three actions should you include in the recommendation? (Each correct answer presents part of the solution. Choose three.)

A.    Configure the Exchange Server 2013 Mailbox servers to listen to unsecured SIP on TCP 5070.
B.    Configure the Exchange Server 2013 Client Access servers to listen to unsecured SIP on TCP 5070.
C.    Install the Client Access server role on the Exchange Server 2013 servers in the Shanghai and Bangkok offices.
D.    Configure the Exchange Server 2013 Mailbox servers as additional SIP peers that contain new pilot identifiers.
E.    Configure the Exchange Server 2013 Client Access servers as additional SIP peers that contain new pilot identifiers.

Answer: BCE

QUESTION 55
You have an Exchange Server organization that contains five servers.
The servers are configured as shown in the following table.

image_thumb7_thumb

You need to create a Lync Server SIP Unified Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server.
Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.)

A.    EX1
B.    EX2
C.    EX3
D.    EX4
E.    EX5

Answer: CDE

QUESTION 56
Drag and Drop Question
You have a server that has Exchange Server 2013 installed.
You plan to configure Unified Messaging (UM) to connect to an IP-PBX.
A telecommunications administrator configures the following numbers on the IP-PBX:
– First extension number: 12100
– Last extension number: 12499
– Help extension number: 12500
– Incoming pilot number: 12000
You need to configure UM to support the following requirements:
– Users must be able to use Outlook Voice Access.
– Users must be able to receive voice mail when callers connect to the users’ extension.
– Callers must be able to dial into an automated help system hosted by your company, which uses standard menus and speech-enabled menus.

Which numbers should you use for the UM configurations? To answer, drag the appropriate number to the correct UM object in the answer area. Each number may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

image_thumb8_thumb

Answer:

image_thumb9_thumb

QUESTION 57
Drag and Drop Question
You are an administrator for a company named Contoso, Ltd. The company is an international reseller that has offices worldwide. One of the offices is located in France.
Each office contains several servers that have Exchange Server 2013 installed.
The Exchange Server organization is configured for Unified Messaging (UM).
Each office contains an IP-PBX device.
You need to ensure that callers to the France office can navigate the voice mail system menu in French.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

image_thumb10_thumb

Answer:

image_thumb11_thumb

QUESTION 58
You have an Exchange Server 2013 organization.
You successfully migrate the public folders from a previous version of Exchange Server.
You discover that one of the public folder mailboxes almost reached its quota size.
You need to move some of the public folders in the public folder mailbox to another public folder mailbox.
What should you run?

A.    Split-PublicFolderMailbox.ps1
B.    Set-MailPublicFolder
C.    Update-PublicFolderMailbox
D.    Set-PublicFolderMailbox

Answer: A

QUESTION 59
You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The network does not have Active Directory Federation Services (AD FS) 2.0 installed. A user named User1 reports that he cannot access his mailbox because his account is locked out.
You verify that the mailbox of User2 is hosted on Office 365.
You need to unlock the account of User1. Which cmdlet should you run?

A.    Set-MailUser
B.    Set-MSolUser
C.    Set-Mailbox
D.    Set-ADUser

Answer: B

QUESTION 60
You have a hybrid deployment of Exchange Server 2013 and Office 365. The mail flow between Office 365 and the on-premises Exchange Server environment is routed through an Exchange Server 2010 Edge Transport server.
Your company is assigned a new set of public IP addresses. A network administrator updates the external firewall address and all of the associated DNS records.
Office 365 users report that they cannot receive email messages from on-premises users.
You discover that outgoing email messages to Office 365 are in the Office 365 SMTP queue on an Edge server.
You need to ensure that the on-premises users can send email messages successfully to the
Office 365 users. Which tool should you use?

A.    The Exchange Management Console
B.    The Exchange Control Panel in Office 365
C.    The Exchange Admin Center
D.    The Exchange Remote Connectivity Analyzer

Answer: C

If you want to get more 70-342 exam preparation material,you can download the free demos in PDF files on Lead2pass.Wish you pass the exam successfully.

www.lead2pass.com/70-342.html

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back