2016 December Cisco Official New Released 700-702 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
How to 100% pass 700-702 exam? Lead2pass provides the guaranteed 700-702 exam preparation material to boost up your confidence in 700-702 exam. Successful candidates have provided their reviews about our 700-702 dumps. Now Lead2pass supplying the new version of 700-702 VCE and PDF dumps. We ensure our 700-702 exam questions are the most complete and authoritative compared with others’, which will ensure your 700-702 exam pass.
Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/700-702.html
How many VLANs are supported by each Cisco ACI VMM?
A. 16 million
What is accomplished when you install a bounce entry in a leaf?
A. Eliminate loops
B. Forward GARP packets
C. Redirect traffic to old VTEP destination
D. Redirect traffic to new VTEP destination
Under a normal migration, when a VM moves due to vMotion onto a leaf that does not have those EPGs and VLANs programmed, the will be deployed immediately. vCenter/ESXI host will send a GARP to ACI, the old leaf will bounce traffic to the new location of the endpoint and traffic/learning will occur. The bounce entry will stick around for a bit (about 5 minutes) and then be removed. The EPGs, VLANs, and Default Gateway will be deployed as soon as the move is detected and there will be little to no downtime (i usually see 0-1 ping loss, most of the time just increased latency)
Which four configuration items place servers into end point groups? (Choose four.)
A. Application image
B. Server location D CJ physical port D DJ VxLAN number
C. Server number
D. VLAN number
E. Virtual port or port group
F. Tenant SLA
What is an application network profile?
A. Application connectivity requirements
B. Performance required by an application
C. Software definition of a server
E. Application traffic pattern
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-731630.html (ACI Application network profile)
Which two statements about the Cisco ACI Layer 4 to Layer 7 service integration are true? (Choose two.)
A. Cisco ACI fabric cannot detect when a server detaches from the network.
B. Cisco ACI fabric cannot detect when a new server attaches to the network.
C. When an endpoint detaches from the Cisco ACI fabric, the Cisco APIC cannot notify the Layer 4 to Layer 7 service to dynamically remove configuration.
D. When an endpoint detaches from the Cisco ACI fabric, the Cisco APIC can notify the Layer 4 to Layer 7 service to dynamically remove configuration.
E. When a new endpoint attaches to the Cisco ACI fabric, the Cisco APIC can notify the Layer 4 to Layer 7 service to dynamically add additional configuration.
F. When a new endpoint attaches to the Cisco ACI fabric, the Cisco APIC cannot notify the Layer 4 to Layer 7 service to dynamically add additional configuration.
Endpoint and Network Event APIs
The following APIs are called when an endpoint or a network configuration changes for endpoint groups (EPGs) that are associated with the graph:
def attachEndpoint( device, configuration, endpoints ) def detachEndpoint( device, configuration, endpoints ) def attachNetwork( device, configuration, networks)
def detachNetwork( device, configuration, networks )
These APIs are called only if the device specification supports an endpoint or network attach notification and you have enabled a notification on the function connector. The AttachEndpoint and DetachEndpoint events are called when an endpoint within an EPG attaches or detaches. The network APIs are called when you modify the subnet configuration under the bridge domain or EPG. These APIs provide information to enable the automation of any service function configuration that should be modified on an endpoint or network configuration change.
An example would be if you dynamically add and remove a server from a pool that is attached to a load balancer or dynamically update a subnet within an access list defined for a firewall.
The device specification file can define an empty function that returns success in the return format that is required by the APIC. It is not mandatory to support endpoint or network event handling functionality.
What is the network design of a Cisco ACI fabric?
A. Hierarchal 3 layer
C. Hub and spoke
D. Spine and leaf
F. Distributed ring
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-731860.html (Cisco ACI overview)
What is the function of the OpRex protocol endpoint registry?
A. Resolves policy and configures hardware/software
B. Learns and knows every device in the network
C. Captures and stores the user intent in policy
D. Stores statistical information
E. Limits device features
Which option describes the Cisco ACI end point group?
A. A collection of users that require the same policy
B. A collection of switches that require the same policy
C. A collection of business goals that require the same policy
D. A collection of hosts/devices that require the same policy
E. A collection of routers interfaces that require the same policy
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-fabric/white-paper-c11-730021.html (see Endpoint groups: building blocks of policy and automation, first sentence)
In the Cisco ACI fabric, which device enforces the policy?
A. VM NIC
B. Hypervisor switch
C. Spine proxy
D. Cisco APIC
E. Ingress leaf
F. Egress leaf
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-731310.html (cisco APIC policy enforcement, see the paragraph below Figure 11)
Which protocol is used for topology discovery?
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI_Fundamentals_BigBook_chapter_0101.html#concept_A9C1C7BB9E8C4798AAD58CBA472B3BA5 (4th para)
The Cisco 700-702 exam questions from Lead2pass are the most reliable guide for Cisco exam. We offer the latest 700-702 PDF and VCE dumps with new version VCE player for free download, and the newest 700-702 dump ensures your exam 100% pass. A large number of successful candidates have shown a lot of faith in our 700-702 exam dumps. If you want pass the Cisco 700-702 exam, please choose Lead2pass.
700-702 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDZ0IwcnNGS2FzMnM
2016 Cisco 700-702 exam dumps (All 60 Q&As) from Lead2pass:
http://www.lead2pass.com/700-702.html [100% Exam Pass Guaranteed]